We have sold universal Keg O-Ring kits on Amazon for years, and our rebuild kits are packaged with the correct size O-rings to rebuild ball lock (Pepsi) and pin lock (Coke) kegs. We used to sell separate ball lock and pin lock rebuild kits but it didn’t take long to figure out that a universal rebuild kit costs us about $0.06 more per keg to put together. We offer our kits with all neoprene rubber parts or a mix of neoprene closure gaskets and dip tube O-Rings and Silicone Post O-Rings.

Recently we discovered a 100% silicone keg gasket set that works well for both ball lock and pin lock kegs. We were originally skeptical when we were shown these, but their unique softer texture makes the post O-rings in these kits ideal for both pin and ball lock kegs. Also these are the first keg gasket sets we decided to buy complete. All of our other gasket sets are still assembled in house from components we buy from a US based Distributor. These new gasket sets are listed at the bottom of this page.

Our 5 keg universal Keg O-Ring kits contain enough O-rings to rebuild 5 kegs. These kits include:
A chart to help sort out the difference between the O-rings included in your kit
5 – Closure / lid Gaskets (The fat O-Ring under the lid)
10 – Universal dip tube O-Rings, 2 per keg
10 – Ball lock O-Rings, 2 per Ball lock keg
Throw these away of you are rebuilding Pin lock kegs
10 – Pin lock O-rings, 2 per Pin lock keg
Throw these away of you are rebuilding Ball lock kegs

5 O-Ring Kits

Our 10 keg universal Keg O-Ring kits contain enough O-rings to rebuild 10 kegs. These kits include:
A chart to help sort out the difference between the O-rings included in your kit
10 – Closure / lid Gaskets (The fat O-Ring under the lid)
20 – Universal dip tube O-Rings, 2 per keg
20 – Ball lock O-Rings, 2 per Ball lock keg
Throw these away of you are rebuilding Pin lock kegs
20 – Pin lock O-rings, 2 per Pin lock keg
Throw these away of you are rebuilding Ball lock kegs

10 O-Ring Kits

Our new 100% Silicone O-ring Kits

Our 100% Silicone universal Keg O-Ring kits are available in 3, 5 and 10 packs. These kits include:
All are individually packed so you can open one pack for one keg and not loose the small parts.
The Closure / lid Gaskets (The fat O-Ring under the lid) is pure white. Dirt and contamination are easy to see, making these gaskets easy to clean.
Each kit includes a set of black Silicone Universal dip tube O-Rings, 2 per keg.
Each kit contains a set of black Silicone Ball lock or pin lock O-Rings, 2 per keg.
Standard pin lock post O-rings are slightly larger than ball lock post O-rings and we were originally skeptical when we were shown these, but their unique softer texture makes these O-rings ideal for both pin and ball lock kegs.

3 Pack	5 Pack	10 Pack